|
Exclusive partners with
Vencon-Varsos S.A.
| |
|
MARCO®
Has the Cure for What
Ails Tobacco
|
| |
|
Powell and DeCloet Bulk Barns
Replace
heat Exchanger. Purchase With or Without Burner. Utilize
Existing Air System.
|
 |
- Heat
exchanger to replace gas combustion chamber or oil heat exchanger in
existing Powell Maxi I, Maxi II and 511 furnaces.
- 100%
stainless steel construction for long life.
- Utilizes
existing mounts in furnace.
- Incorporated
6 flues, providing increased surface area for greater efficiency. (
Only two flues are currently offered on most heat exchangers.)
- Can be fired
by either oil, LPG or natural gas.
- Exhausts out
the rear of the barn rather than through the roof
|
| |
|
|
|
"Hands Down,
MarCo's the BEST."
Tobacco farmer Billy
Bass has no doubt how the MarCo Heat Exchanger compares to competitive
brands. He has tried it both ways. Billy produces about 135 acres of
flue-cured tobacco in Wilson County, NC. He has converted 11 Powell
barns with the MarCo system.
He also has two barns of another make, and they have been retrofitted
with that company's furnace and heat exchanger system. "MarCo is hands
down the best system out there," says Billy.He is particularly impressed
by the superior airflow in the MarCo units. |
| |
|
"The MarCo equipment
pumps a high volume of air through the chamber, so we cure in seven days
or less with the Powell barns, and also save fuel," Billy reports. Other
converted barns, he says, have air flow deficiencies, stretching out the
cure by two to three extra days. Good airflow is a key to successful
nitrosamine reduction, and Billy says nothing compares to MarCo in that
category. "MarCo does the job, and Tom Pharr's team at MarCo worked with
me 100 percent," he advises. |
 |
|
|
|
What they're
saying in Georgia, Florida and Virginia
"We made the right
choice with the MarCo heat exchanger system in our Powell bulk barns.
Some other brands can't cook the tobacco out. But MarCo cooks out a barn
as quickly as a conventional system. And MarCo gives us better quality
too. MarCo is the way to go."
Franklin Burch, Screven, GA
"We installed the
MarCo heat exchanger and burner in some of our Powell barns, but kept
the original furnace case and fans. I thought cooking time would go up
with the MarCo heat exchanger, but it stayed the same. And the cures
were good. We had a very satisfactory experience with MarCo, and we like
to stay with what works."
Damon Dees, James, FL
"Francis Oil
Service has installed about twenty MarCo heat exchangers and burners for
tobacco farmer customers. There haven't been any complaints at all, and
that says a lot for the MarCo system. I predict a good future for MarCo
in this area."
Grayson Francis, Brookneal, VA
|
|
|
|
